How To Handle A Broken Garage Door Spring
If you are a general contractor that has been hired to handle a broken garage door spring, then this guide is for you. Along with the instruction of an experienced contractor, this guide will help you handle malfunctioning garage door springs while still being cautious of the tension stored within.
Identify The Issue
While each garage door can usually keep their springs intact for nearly a decade, you may find that springs still seem to break down. These springs typically wear down over time simply because they are handling the full weight of the garage door, and eventually, they snap and break. As such, you'll most likely be replacing the spring entirely, rather than repairing the spring's additional parts, such as nuts and bolts, or adjusting other parts of the garage door. Once you've determined what needs to be fixed, you can either adjust the garage door parts or remove and replace the spring entirely.
Remove
Removing a garage door spring is tricky business, as the springs hold hundreds of pounds of force in tension. You'll need to secure the garage door to the track so that the entire system is stable and then carefully unwind the garage door spring with winding bars. Once both springs are unwound, you can remove the springs, find your replacement for the broken one, securely reattach them, and unlock the entire door. Assuming you've done this all without hurting yourself or messing up, you should have the broken garage door spring removed and replaced.
Replace
It's important to make sure that you have the right replacement spring for the door that you will be working on. Garage door springs differ in terms of tension held and size, and you'll most likely want to measure or estimate the existing springs before you buy a new one. The existing springs can offer more than their vertical and horizontal measurements, as garage springs typically have various codes engraved or marked on them to represent their diameter as well. Additionally, you will want to make sure that the springs are facing the right direction relative to the door. Using the wrong springs puts the garage door motor at risk of working overtime, or just not having the strength needed to pull its weight.
Broken garage door springs can be difficult to handle, but with the right amount of caution, you can easily diagnose the issue, remove the spring, and replace it properly. Always use the right tools and a high level of care when replacing garage door springs. To learn more, you can check out this weblink, https://planooverhead.com/, or similar websites.